Hongyuanxiang summarizes more than 10 years of experience and shares with you how to correctly handle the faults during the blowing process of the bottle blowing machine:
1. High temperature alarm for lightbox waterway.
Solution: Disconnect the rubber pipe connecting the waterway, blow and clean the waterway with low-pressure air and alcohol.
2. Claw malfunction
Solution: Adjust the height of the slide table or the position of the gripper.
3. The action is stuck.
Solution: Restart the machine.
4. Unable to manually set the origin point
Solution: Check if the first and second shift grippers, as well as the variable pitch positioning plate, are stuck in their respective positions. If not, manually move them to their corresponding positions and then move to the origin.
5. Inappropriate action
Solution: Check if there is anything stuck. Adjust the gas flow valve.
6. Excessive exhaust noise
Solution: Check if the high-pressure exhaust muffler is damaged or detached.
7. Uneven embryo distribution under the embryonic tract
Solution: Adjust the position of the embryo hopper.
The above are the faults and solutions during the blowing process of the bottle blowing machine.
Wechat number
Video Number
Official Tiktok
Super ShopAlibabaCopyright ? 2022 Shenzhen Hongyuanxiang Plastic Mold Co., Ltd
